https://uat-onebondadhesives-com.content.saint-gobain.io/en/single-product/glass-bonding/onebond-pu-power-180
OneBond PU POWER 180
OneBond PU Power 180 has a three hour drive-away time and an open-time of 35 minutes, making it ideal for applications that require long cycle times (stationary glass replacement is common for busses, trucks and vans).
PRODUCT HIGHLIGHTS
- • Requires the use of a glass primer (PU PRIMER 5)
- • Drive Away Time of 180 min / 3 hours (crash test FMVSS 212 compliant)
- • Skin time 35 min at 23ºC 50%RH
- • Full adhesive strength achieved after 24 hours
- • High modulus (provides extra rigidity to the vehicle body)
- • Can withstand temperatures of up to +100°C
- • Low conductivity, provides corrosion protection
- • Solvent free and odorless
- • Thixotropic, does not sag
- • Black colour
- • Shelf life of 12 months when stored in original containers at 5ºC-25ºC.
| PART NUMBER |
SIZE |
DRIVE AWAY TIIME |
OPEN TIME |
COLOUR |
BOX QTY |
| 78072765564 |
310ml |
3 hours |
35 mins |
Black |
12 |
https://uat-onebondadhesives-com.content.saint-gobain.io/en/single-product/glass-bonding/onebond-pu-fast-120
OneBond PU FAST 120
OneBond PU Fast 120 has a two hour drive-away time, and a skin time of 25 minutes. It is recommended for car glass replacement and to structurally bond low thickness metal panels in commercial vehicles, due to its high elasticity. Available in black in 310ml aluminum cartridges.
PRODUCT HIGHLIGHTS
- • Requires the use of a glass primer (PU PRIMER 5)
- • Drive Away Time of 120min / 2 hours (crash test FMVSS 212 compliant)
- • Skin time 25 min at 23ºC 50%RH
- • High modulus (provides extra rigidity to the vehicle body)
- • Can withstand temperatures of up to +100°C
- • Low conductivity, provides corrosion protection
- • Solvent free and odourless
- • Thixotropic, does not sag
- • Black colour
- • Shelf life of 12 months when stored in original containers at 5ºC-25ºC.
| PART NUMBER |
SIZE |
DRIVE AWAY TIIME |
OPEN TIME |
COLOUR |
BOX QTY |
| 78072765565 |
310ml |
2 hours |
25 mins |
Black |
12 |
https://uat-onebondadhesives-com.content.saint-gobain.io/en/single-product/glass-bonding/onebond-pu-express-30
OneBond PU EXPRESS 30
OneBond PU Express 30 is a high modulus, non-conductive glass-bonding polyurethane adhesive. OneBond PU Express is recommended for windscreen replacement in high end cars. It has a 30 minutes drive-away time and is FMVSS 212 crash test certified.
PRODUCT HIGHLIGHTS
- • Requires the use of a glass primer (PU PRIMER 5)
- • Drive Away Time 30 min (crash test FMVSS 212 certified by TÜV)
- • Skin time 15 min at 23ºC 50%RH
- • Full adhesive strength achieved after 24 hours
- • High modulus (provides extra rigidity to the vehicle body)
- • Can withstand temperatures of up to +100°C
- • Non-conductive, provides corrosion protection
- • Solvent free and odourless
- • Thixotropic, does not sag
- • Black colour
- • Shelf life of 12 months when stored in original containers at 5ºC-25ºC.
| PART NUMBER |
SIZE |
DRIVE AWAY TIIME |
OPEN TIME |
COLOUR |
BOX QTY |
| 78072765568 |
310ml |
30 mins |
15 mins |
Black |
12 |
https://uat-onebondadhesives-com.content.saint-gobain.io/en/single-product/glass-bonding/onebond-op34pi-pneumatic-applicator-gun-0
Hand-held, professional pneumatic gun for applying 290/310ml standard cartridges, 400 ml sachets and two component products packed in coaxial cartridges. Made of metal.
PRODUCT HIGHLIGHTS
- • Most indicted for Glass Bonding due the piston mechanism. No risk for the cartridge to enter in contact with the air
- • Recommended for applying medium viscosity sealants and high viscosity glass-bonding adhesives
- • Also suitable for dispensing two-part epoxy and polyurethane based structural adhesives packed in coaxial cartridges by changing the ring nut (the static mixer is not centered).
- • Connection: ¼ male gas
- • Working pressure : 4-8 bar
- • Weight 1.416 g.
- • OneBond OP34PI is CE marked: it is in conformity with all the relevant requirements at EU level
- • Users manual included
| PART NUMBER |
QUANTITY |
| 63642599990 |
1 |
https://uat-onebondadhesives-com.content.saint-gobain.io/en/single-product/glass-bonding/onebond-ms-rapid-60
OneBond MS RAPID 60
OneBond MS Rapid 60, has a 15 minutes skin-time, a one hour drive-away time and does not require the use of primer. It is FMVSS 212 crash test certified.
PRODUCT HIGHLIGHTS
- • Drive Away Time of 60 min /1 hour (crash test FMVSS 212 certified by TÜV)
- • Skin time 15 minutes at 23ºC 50%RH
- • Full adhesive strength achieved after 24 hours
- • High modulus (provides extra rigidity to the vehicle body)
- • Can withstand temperatures of up to +100°C
- • Non-conductive, provides corrosion protection
- • Solvent free and odourless
- • Thixotropic, does not sag
- • Black colour
- • Shelf life of 12 months when stored in original containers at 5ºC-25ºC
| PART NUMBER |
SIZE |
DRIVE AWAY TIIME |
OPEN TIME |
COLOUR |
BOX QTY |
| 78072765570 |
310ml |
1 hours |
15 mins |
Black |
12 |
https://uat-onebondadhesives-com.content.saint-gobain.io/en/single-product/glass-bonding/onebond-osp340-18-manual-applicator-gun-0
Hand-held, professional manually operated applicator gun for applying one component products and two component products packed in coaxial cartridges. Made of metal.
PRODUCT HIGHLIGHTS
- • Ring nut made of aluminum
- • Suitable for 290/310 ml cartridges and 400/600 ml sachets
- • Recommended for applying medium viscosity sealants and high viscosity glass-bonding adhesives
- • Thrust ratio: 18:1, hence not suitable for dispensing structural adhesives packed in coaxial cartridges (1:1 & 2:1).
- • Maximum force: 450 Kgf - 4.412 N
- • Progress/Stroke: 4,5 mm
- • Weight: 1182 g
- • OneBond OSP340-18 does not need the declaration of conformity (CE Mark) because this model is not regulated by the EU directive.
| PART NUMBER |
QUANTITY |
| 77696097769 |
1 |
