Gap Fillers

OneBond 041 is a hand-held, manually operated applicator gun for applying 4:1 and 10:1 mix ratio epoxies, resins and PUs.

PRODUCT HIGHLIGHTS

• • Manually operated dual cartridge gun for convenient and cost effective application
• • Plunger enables the adhesive to be dispensed in a controlled flow
• • Lightweight portability and durable construction for many assembly operations 
• • For applying epoxies and resins
• • Suitable for most 2-part epoxy cartridges 50ml

OneBond 021 is a hand-held, manually operated applicator gun for applying 1:1 and 2:1 mix ratio epoxies, resins and PUs.   

PRODUCT HIGHLIGHTS

• • Manually operated dual cartridge gun for convenient and cost effective application
• • Plunger enables the adhesive to be dispensed in a controlled flow
• • Lightweight portability and durable construction for many assembly operations
• • For applying epoxies and resins
• • Suitable for most 2-part epoxy cartridges 50ml

OneBond OM21 is a full metal frame hand-held, manually operated applicator gun for applying 1:1 and 2:1 mix ratio epoxies, resins and Pus.

PRODUCT HIGHLIGHTS

• • High power so easy pressing out the adhesive
• • Durable product because of the complete metal frame
• • Designed to guarantee accurate and sustainable application
• • Ergonomic moulded grip
• • Nice view on your brand due to a shorter housing for the cartridge.
• • Completely black dispenser so doesn’t show grease and dirt.




PART NUMBER	QUANTITY
77696097231	1

 

2K Heat Resistant

OneBond 8740 is a non-sagging rigid 2-part repair adhesive designed to maintain its properties at high temperatures and in harsh environmental conditions such as UV light, salt water, hydrolysis, and chemicals. It bonds well to thermoplastics (ABS, PC, PVC), metals (steel, aluminium), wood, ceramic, concrete, stone and glass. Constructed with excellent mechanical joint strength, OneBond 8740 is high load bearing, good for large assemblies and can be applied underwater.

PRODUCT HIGHLIGHTS

• • Open-time from 20 to 25 minutes
• • Long fixture time (3 to 4 hours) can be accelerated by adding heat
• • Can be painted and sanded after 4 hours
• • Resistant up to +150ºC
• • Cures underwater
• • Two static mixers included
• • 2:1 ratio adhesive requires manual dispensing gun

Fast Curing Epoxy

OneBond 8422 is a super flexible fast curing epoxy designed to bond flexible substrates like rubbers (neoprene, NBR), leather and textiles. It can also bond steel, wood, ceramic, concrete, stone, glass and thermoplastics (PVC, PC, ABS) as well as dissimilar substrates (e.g. plastics with metals) and parts subject to vibration and environmental stress. Can be used underwater, ideal for marine applications, swimming pool maintenance and sealing exterior pipe joints.

PRODUCT HIGHLIGHTS

• • Fast curing
• • Open time 6-8 minutes
• • Can be painted after 30 minutes
• • Can withstand temperatures up to +50°C
• • Super flexible and cures underwater

Fast Curing Putty

OneBond 8760 is a rigid two part fast curing putty designed to bond thermoplastics (ABS, PC, PVC), metals (steel, aluminium), wood, ceramic, concrete, stone. It can be used for repairing tanks, pipes and castings, filling oversized bolt holes, welds and non-structural defects, such as concrete cracks and can be applied underwater. When cured, exhibits high compressive strength and good adhesion. 

PRODUCT HIGHLIGHTS

• • Short fixture time (2-3 minutes)
• • For fast repair in vertical and overhead positions
• • Can be sanded, drilled and painted after 4 hours
• • High compressive strength
• • Black in colour
• • Cures underwater

2K Structural Adhesive

OneBond 7790 two-part repair adhesive is designed for high precision bonding and sealing without dripping. It bonds to PC, ABS, PVC, EPS, phenolic resins, flexible plastics (neoprene, NBR), leather, wood, metals (aluminium, steel, zinc) and ceramics and has the ability to bond dissimilar substrates. Recommended to structurally bond parts not subjected to cyclic stress, such as brackets. It has high static load resistance and is transparent in colour for bonding decorative elements.

PRODUCT HIGHLIGHTS

• •  Fast fixture time (10 to 40 seconds)
• • Cures fast at room temperature (5-8 minutes), 24 hours before full strength and chemical resistance is achieved
• • Can be painted after 10 minutes and sanded after 15 minutes
• • Temperature resistance from -20ºC to +80ºC
• • Transparent in colour for bonding decorative elements
• • Two static mixers included
• • 4:1 ratio adhesive requires manual dispensing gun

OneBond 041 is a hand-held, manually operated applicator gun for applying 4:1 and 10:1 mix ratio epoxies, resins and PUs.

PRODUCT HIGHLIGHTS

• • Manually operated dual cartridge gun for convenient and cost effective application
• • Plunger enables the adhesive to be dispensed in a controlled flow
• • Lightweight portability and durable construction for many assembly operations 
• • For applying epoxies and resins
• • Suitable for most 2-part epoxy cartridges 50ml

OneBond 021 is a hand-held, manually operated applicator gun for applying 1:1 and 2:1 mix ratio epoxies, resins and PUs.   

PRODUCT HIGHLIGHTS

• • Manually operated dual cartridge gun for convenient and cost effective application
• • Plunger enables the adhesive to be dispensed in a controlled flow
• • Lightweight portability and durable construction for many assembly operations
• • For applying epoxies and resins
• • Suitable for most 2-part epoxy cartridges 50ml